Filling Water; Application Instructions - Clatronic LB 3212 Manual De Instrucciones

Arrangement of control elements
1 Nozzle
2 Tank
3 I/0 On/Off switch
4 REFILL indicator (tank empty)
5 Regulator
Intended use
This appliance serves
• as a humidifi er for a maximum room size of 40m².
It is exclusively intended for this purpose and may be only
used appropriately. It may only be used in the manner
described in these operating instructions. You may not use
the appliance for commercial purposes.
Any other use is considered as not intended and can lead to
damages to property or even to personal injuries.
Clatronic International GmbH is not liable for damages caused
by non-intended use.
Unpacking the appliance
• Remove the appliance from the packaging.
• Remove all packaging material such as plastic fi lm,
fi lling material and cardboard packaging.
• Check the package contents.
NOTE:
Dust or production remainders can still be present
on the appliance. We recommend briefl y wiping the
housing with a damp cloth.

Application instructions

The LB 3212 replaces lost moisture into dry air providing a
pleasant moisture balance and increasing the humidity level. This
offers the following benefi ts
• It provides for a healthy room climate and for your well-
being
• Hair does not dry out as quickly as it normally would in
dry air
• Electrostatic charges in the air are suppressed
6 POWER indicator
(supply connection)
7 Base unit
8 Float
9 Ultrasonic surface
40
ATTENTION!
This appliance operates with ultrasonics. The emitted
sound can have a disturbing effect on animals.
Location
A skid-proof, even surface is suitable as installation location.
The appliance operates more effectively, if you keep the
windows and doors closed during operation.
Water
It is recommended to use distilled or boiled, cold water.
• Renew the water every 3-4 days even if there is still
water in the tank.
• If the appliance is not used for extended periods, empty
the tank and base unit.
• Allow the parts to dry.

Filling water

ATTENTION!
Do not pour water into the nozzle opening.
• To fi ll the appliance with water, lift the tank from the
base unit and rotate. The fi lling opening is located at
the bottom.
• Unscrew the cap and fi ll water up to about
3 centimetres below the edge.
• Tighten the cap and return the tank to the base unit.