Appliance Description - Hans Dinslage SANITAS Instrucciones Para El Uso

5. Appliance description

Shiatsu massage pillow (front)
1
2
3
3
4
5
Hand switch
2
3
4
6. Start-up
CAUTION
• IMPORTANT: Deactivate the transport lock on the massagemechanism before starting-up
for the first time. Remove the screw on the reverse side of the seat cover using the tool sup-
plied. The Shiatsu seat cover will be irreparably damaged and unusable if the transport lock
screw is not removed and the Shiatsu seat cover is operated immediately. No guarantee is
accepted in this case.
• Insert the transport lock screw each time the device is transported again. The device may be ir-
reparably damaged if it is transported without the transport lock.
• Fasten the protective cover to the surface of the Shiatsu seat cover with the Velcro straps. It is also
possible to massage without the protective cover; this is generally found to be "harder".
• Position the seat cover upright on a suitable seating arrangement with seating surface and backrest
(chair, sofa, or similar). Ensure that the seat cover is supported over its entire area and has a suf-
ficiently high backrest.
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the device to the mains power supply.
3
6
1 Protective cover
2 Four massage heads, rotating in pairs with
vertical movement
3 Fastening straps
4 Power cord
5 Hand switch
6 Storage bag
3
1 button with control LED
2 A + B button with control LED
3 A button with control LED
4 B button with control LED
1
5 Connection cable to the device
5
11