INSTRUCTIONS FOR THE USE OF REMOTE
1. Touch remote have 64 touch key, each keys function below:
Brightness control
B+:
the output signal brightness control, every time you press this button, the brightness series add 1, altogether
25 levels.
B-:
the output signal brightness control, every time you press this button, the brightness series, minus 1,altogether
25 levels;
Speed control
S+:
the output signal speed control,every time you press this button,the speed series add 1, altogether 100
levels.
S-:
the output signal speed control,every time you press this button,the speed series minus 1, altogether 100
levels;
2. Power supply management:
Stop to use the remote more than 20s, the remote will enter the stand by state(untouchable state);slightly shake
once, then the remote will come back to the normal working state(touchable State).
Slightly shake once, then the remote will came back to the normal working state(touchable state).
(1)The remote is idle or send,signal when the PWR bright, PWR is off,then means the remote is in standby state;
(2)RF is bright, that means remote is sending signal, off means there is no signal sending.
Power button
Pause
on the dynamic mode,you can make the controller to stop the current state now.
Color pulley
Multicolor pulley touch key, static mode choose key, more than 60 touch points.
The button has two functions:
①Pulley static color choice key,so when the current control mode is M key mode (color),
if must realize pulley static color,can press this key.
② Pulley color switch key, can change from 60 kinds of static colors (as the pulley shown).
Mode (M+/M-)
①M is mode choose key,so when the current control mode is pulley mode(color),if you
want to realize the mode (color) of M key, can press this button;
②M is mode switch key, so when the current control mode is "M" key mode, can press
this button to switch the mode (color) which state in the M key mode table.
Remote control
