X 2,5
Open the safety lever to open the handle.
Start coiling up the webbing exactly one revo-
lution so that the drum is fully covered by the
webbing. Keep the setup under tension while
applying the handle for tensioning. Like this
the slackline is anchored but the ratchet has
room for final tensioning.
Repeat steps 2 to 6 on the other side of the
slackline setup with the second ratchet, shack-
le and round sling. Remember to use the bigger
round sling on the bigger tree.
Once the webbing is threaded through the
second ratchet and the round slings are in cor-
rect position pull out as much slack as possi-
ble out of the slackline before tensioning the
slackline with the second ratchet.
Depending on the desired tension use the sec-
ond ratchet to tension until the coil is full. Do
not exceed more than 2,5 revolutions to avoid
that the webbing is coiled up too much.
GIBBON MANUAL - ENGLISH