Work; Applications; Use And Operation; Location Of Controls - Dri-Eaz DriTec Pro 150 Guía De Referencia Rápida

Dri-Eaz DriTec Pro Desiccant Dehumidifiers
WARNING
FIRE AND ELECTRIC SHOCK
HAZARD
Unit must be electrically grounded.
•Insert 3-prong plug on power cord
directly into matching grounded
receptacle.
Keep wiring and motor dry.
•Do not operate in standing water
•Do not operate in rain or snow.
•If electrical components become
wet, allow them to dry before
using.
Read and understand manual
before use.
Handle
07-01504B Copyright 2005 Dri-Eaz Products, Inc.
Owner's Manual
115-volt models: 150, 150C
READ AND SAVE THESE INSTRUCTIONS
I
NTRODUCTION
DriTec Pro desiccant dehumidifiers draw moisture from structural materials
and contents in cold temperatures, or low to medium humidity environments;
conditions where traditional dehumidifiers work less efficiently.
H D
OW
DriTec Pro desiccant dehumidifiers operate by drawing moist air in, across a
rotor filled with adsorbent silica gel. This material chemically attracts water
molecules until it becomes saturated.
DriTec Pro 150
The DriTec Pro 150C works much the same
way, but utilizes a condenser to cool the
warm air, and remove the water collected
through a drain hose.
A
PPLICATIONS
• Water damage restoration
• Carpet cleaning
• New construction
• Humidity control
O
PERATING YOUR

Location of controls

DriTec Pro 150C
Electrical
cord

Use and Operation

T P D
RI EC RO EHUMIDIFERS
The DriTec Pro 150 utilizes a combination of
heat and reactivation air to "cook" the mois-
ture out, releasing both warm, dry air and a
stream of concentrated moisture-laden air
that should be ducted outside.
D T
RI EC
Start/stop con-
trols, hour meter
Cord wrap
Optional humistat
connector
Fan switch
Optional water level
sensor connector
Drain hose
connector
W
ORK
DriTec Pro 150C
condensing unit
P D
RO EHUMIDIFIER
DriTec Pro 150
Electrical
cord
Fan Switch
2