Tools And Materials; Before You Begin - Kohler K-702010 Manual Del Usuario

Tools and Materials

Safety Glasses
Drill & Assorted
Drill Bits

Before You Begin

WARNING: Risk of serious injury. Damage prior to installation can result in glass shattering.
Inspect the glass and all parts for damage before installation.
WARNING: Risk of serious injury. Improper installation can result in glass shattering. Follow all
installation instructions.
NOTICE: Do not touch the edges of the tempered glass with tools or any other hard objects. Do not set
the unframed tempered glass directly on the floor or any hard surface.
WARNING: Risk of serious injury. Do not cut tempered glass. Tempered glass will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels can shatter. Regularly inspect the
glass and all parts for damage, missing, or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
IMPORTANT! Leave this manual for the end user. Read these instructions before installing or using this
product.
NOTE: Record the model number on the Homeowners Guide. The proper model number will enable our
customer service representatives to quickly help you if needed.
Your new Kohler door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results. These instructions show the
door installed with a left side swing. Doors that swing to the right would be opposite.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
The shower receptor should be installed and prepared at this time, including finished wall materials.
Two hex wrenches, 5/32" and 5/64" are supplied. A 7/64" drill bit is also supplied.
Place a drop cloth in the bottom of your shower to cover your drain and ease clean-up.
Closely follow the instructions pertaining to the sealant application on the door. Sealing areas other
than those shown may cause leaking.
Two people should perform this installation.
Kohler Co. reserves the right to make revisions to the design of products without notice, as specified
in the Price Book.
1011451-2-H
Measuring Tape
Assorted Screwdrivers
Pencil
Miter Saw or Hack Saw with
32-teeth Per Inch Blade
2
Plus:
• Drop cloth
• Fine flat file
Level • Utility knife
Silicone Sealant
Kohler Co.