Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Set Arrangement
7
The procedure is based on 3X3 installation.
Set Arrangement step : 8 → 5 → 2, 7 → 4 → 1, 9 → 6 → 3
1. Mount set 8, then loosen the horizontal alignment screws to lower the set by approximately 30 mm.
(Caution: Otherwise, when set 5 is mounted the sets may collide and cause damage.)
Once the set is lowered, use the horizontal alignment screws to align the set horizontally. Tighten the right/left
screws.
SCALE 0.100
3
2
6
5
9
8
<Horizontal Alignment Screw>
Loosen the screw to lower the set.
(Loosen the right and left screws gently in turn.)
1
4
7
<Right/Left Fixing Screw>
Tighten the screws to fix the left and right slides.
9
Tabla de contenido
