Getting Started - Brigmton BAI-300 Manual De Usuario

GETTING STARTED

CONNECTING THE TRANSMITTER CRADLE
To connect to hi-fi equipment, use one of the supplied audio cables (see
page 1 - Package Contents).
1. Connect one end of the audio cable to the audio input socket (13).
2. Connect the other end of the cable to the headphones output socket of
your hi-fi equipment.
If your hi-fi equipment has a 6.3 mm jack socket, connect the adapter
plug (see page 1 - Package Contents) to the audio cable.
You may also connect the adapter cable (see page 1 – Package
Contents) to the cable to use the Cinch audio outputs of your hi-fi
equipment.
3. Plug the small plug at the cable end of the mains adapter into the
power socket (12).
4. Plug the power adapter into a wall outlet.
As soon as you connect the power adapter to the transmitter cradle and
the mains, the transmitter cradle power indicator
(18) lights up green. This is independent of the position of the On/Off
switch (15).
Only use the integrated mains adapter indoors.
CHARGING THE BATTERY OF THE WIRELESS HEADPHONES
Please charge the battery before using the product for the first time. A
charging cycle takes approx. four hours. Connect the integrated mains
adapter to the transmitter cradle and to a wall outlet (see page 6 –
Connecting the Transmitter Cradle).