Analysis And Problem Solving; Problems, Causes And Solu Ons - Skymsen AMP-400 Manual De Instrucciones

1.2 Main Components
All components are made with carefully selected materials, in accordance with
the manufacturer's standard tes ng procedures.
08
08
07
06
05
01 – Palanca
02 – Cabinete
03 – Traba
04 - Pies
05 – Base de la Bandeja
22
PICTURE 01
06 - Bandeja
07 - Conos
08 – Boton Prender
09 – Boton Desligar
Always unplug the machine when emergency cases arise.
4.7Advice
Electrical or mechanical maintenance must be done by qualified personal for such
opera on.
Person in charge has to be sure that the machine is under TOTAL SAFETY condi ons when
working.
01
5. Analysis and Problems Solving
5.1 Problem, causes and solu ons
This equipment has been designed to operate with the need of minimum maintenance but
the natural wearing caused by longer use of the equipment may occasionally cause some
malfunc ons.
If such problem occurs with your Blender refer to Table 02 in which the most common
situa ons are listed with recommended solu ons.
02
03
04
IMPORTANT
15