Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DETERMINING REAR MOUNTING SCREW LOCATIONS
D.
CAUTION: Wear gloves
to avoid cutting fingers
on sharp edges.
1
Use a level to check that the template is positioned
accurately.
2
Locate and mark at least one stud on the left or right
side of the centerline. It is important to use at least one
wood screw mounted firmly in a stud to support the
weight of the microwave.
Mark three additional, evenly spaced locations for the
supplied toggle bolts.
Installation Instructions
NOTE: The Rear Wall Template serves
to position the bottom mounting plate and
to locate the horizontal exhaust outlet.
10
C L
3
Drill holes in the marked locations. If there is a stud,
" hole for wood screws. For holes that don't
drill a
3
⁄
16
line up with a stud, drill a
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
" hole for toggle bolts.
5
⁄
8
Capítulos
Tabla de contenido
