Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN PJ 1000 Manual Original

2. When pressing food with the pushing bar, remember to always press it down evenly.
The pressing force should not be more than 1 kg. Do not push suddenly, otherwise the
amount of juice will be reduced.
3. During juicing, make sure there is not too much juice and residue in the middle ring
and residue barrel. If it is too full, please cut off power supply, empty the containers
and then use it again.
This machine is equipped with a rotating switch. ON/OFF, MIN/MAX
ON is for turning on the machine, OFF is for turning off the machine,
There are 4 sections from MIN to MAX, which will be displayed on the LCD screen.
1 = lowest speed to 4 = highest speed
Please note
► After one minute of use, turn off the device for one minute, then use it again. When you
do this three times, turn off the device for 15 minutes and let it cool. This preserves the
motor, elongates its life expectancy and is more efficient.

15 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to cleaning
the device incorrectly and to ensure trouble-free operation.

15.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the device, cord or plug in water or other liquids and do not place in the
dishwasher.
► The blades are really sharp. Handle them with care.

15.2 Cleaning

1. Do not clean the main machine. Only wipe it with a damp cloth. The other parts
(pressing bar, cover, middle ring, residue barrel, juice jug) can be directly cleaned with
water.
2. The blades are very sharp. Hold them under running water to clean them, do not clean
them by hand.
30