Cleaning And Maintenance; Safety Information; Cleaning; Troubleshooting - CASO DESIGN CP 330 Pro Manual Del Usuario

Exprimidor de cítricos
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

16.1 Safety information

Attention
Please observe the safety instructions, before cleaning your device
► Unplug the device when not in use and before any cleaning.
► Never immerse the main body, cord or plug in water or other liquids and do not place in
the dishwasher.
► Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Clean the device directly after each use.

16.2 Cleaning

Pull the plug of the device. Wipe the main body and the handle with a soft cloth.
Press on the lock of the lid of the cone and detract it. You can clean the lid of the cone, the
cone, filterinsert and juice tray with warm water and a bit of detergent. Rinse them with
water after this thoroughly and dry them. As an alternative you can clean these parts in the
dishwasher. Reassemble the device.

17 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

17.1 Security advices

Attention
► Repairs of electrical devices must be carried out by qualified personnel who are trained
by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
17.2 Troubleshooting
Problem
The device does not
start.
► If above mentioned steps don't solve the problem, please contact your customer
service.
► Please clean the device before sending it to customer service.
Solution
• Please check whether the power plug is properly plugged.
• Please check whether the assembly is done according to
assembly methods.
Please note
27
Tabla de contenido
loading

Este manual también es adecuado para:

3560

Tabla de contenido