Tabla de contenido
D After ironing
Unplug the iron and press the steam on/off
•
button (3) so that it catches in its lower
position (steam off).
To prolong the life of the iron, empty the
•
water tank.
Store the cool iron in a dry place always
•
standing on its heel rest.
E Maintenance and cleaning
To clean the sole plate, use steel wool.
Then wipe the sole plate clean with a cloth.
Never use a scouring pad, vinegar nor
other chemicals. To clean the soft material
of handle and power shot and spray
buttons, use soapy water.
F Cleaning the anticalc valve
Your iron is provided with an anticalc valve
which is located at the lower end of the
steam on/off button (3). The anticalc valve
has to be decalcified regularly (e.g. when-
ever steam development is insufficient).
Before removing and cleaning the anticalc
•
valve, unplug the iron and empty the water
tank.
Press the steam button so that it is lifted.
•
Carefully pull out the steam button.
Do not touch the anticalc valve at its lower
end.
•
Immerse the anticalc valve in vinegar (not
vinegar essence) or lemon juice until the
lime becomes soft.
Using a non-metallic brush, remove re-
maining residues and make sure that parti-
cularly the openings at the bottom and
on the lower sides are clean. Rinse under
running water.
Then re-insert the steam button and push
•
it down as far as it will go.
Press it to check the steam on/off function.
•
Note: The iron must never be used without
the steam button.
G Decalcifying/anticalc system
When scale particles come out of the
steam vents or when the steam function
does not work well even after having
cleaned the anti-calc valve, you should
proceed as follows to clean the steam
chamber. For this, proceed as follows
(G 1-13):
Press the steam button (3) so that it
•
catches in its lower position.
Fill the tank, connect the iron to the mains,
•
select the «•••» temperature setting and
wait until the temperature pilot light goes
off.
Unplug the iron and hold it over a sink.
•
Press the steam button so that it is lifted.
Then carefully pull up the steam button
and turn it so that it rests in this position.
Caution: When the steam button is pulled
up, hot water and steam will come out
from the sole plate.
Wait for the sole plate to cool down, then
•
clean it as described above.
Re-insert the steam on/off button and
•
push it down as far as it will go. Press it so
that it catches in its lower position.
Refill the tank with water, heat up the iron
•
and press the power shot button 4 times
to rinse the iron before ironing.
Important: Only pull out the steam button
when you want to activate the anticalc
system. Never pull out the steam button
when ironing.
6
H Trouble-shooting guide
Problem
––––––––––––––––––––––––––––––––––––––
Drops
coming out
of the steam
vents
No steam
at all
Less steam
develops or no
steam at all
Calcium
particles
coming through
the steam vents
––––––––––––––––––––––––––––––––––––––
Subject to change without notice.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/EEC
and to the Low Voltage Regulation
(73/23 EEC).
For further information about garment care
and maintenance, please also see our
web site: www.braun.com
Guarantee
We grant a 1 year guarantee on the product
commencing on the date of purchase.
Within the guarantee period we will elimi-
nate, free of charge, any defects in the
appliance resulting from faults in material
or workmanship either by repairing, or
exchanging parts or exchanging the whole
appliance as we may choose.
Not covered by this guarantee: damage
arising from improper use or storage
(operation with incorrect current/voltage,
plugging it into an unsuitable power point,
breakage, use of commercial decalcifyers,
wet storage on the ironing surface), normal
wear and defects which have a negligible
effect on the value or operation of the
appliance.
The guarantee becomes void if repairs are
undertaken by unauthorized persons and if
original Braun parts are not used.
The guarantee only comes into force if
the date of purchase is confirmed by the
dealer's stamp and signature on the
guarantee card and registration card.
This guarantee extends to every country
where this appliance is supplied by Braun
or its appointed distributor and where no
import restrictions hinder or prevent service
being given under guarantee.
Service under the guarantee does not
affect the expiry date of the guarantee.
The guarantee on parts or entire appliances
which are exchanged ends when the guar-
antee on this appliance expires.
In the event of a claim under this guaran-
tee, hand in the complete appliance with
the valid guarantee card to your dealer, or
send both to the nearest Braun Customer
Service Centre. All other claims including
for damages resulting from this guarantee
are excluded unless our liability is legally
mandatory.
Those claims arising out of the sales
contract with the vendor are not affected by
this guarantee.
For UK only:
This guarantee in no way affects your
rights under statutory law.
Remedy
Turn the steam regulator
anti-clockwise to reduce
the steam or press the
steam button to turn the
steam off.
Take longer intervals
when pressing the power
shot button.
Select a higher tempera-
ture setting.
Press the steam button
so that it is lifted.
Clean the anticalc valve
(see F).
Decalcify the steam
chamber (see G).
Tabla de contenido
