SATA 98103 Manual Del Uso página 6

中文
EN DE RU KO PT JA ES
98103
Digital Tire Inflator:
High-precision tire pressure measurement
High-brightness LCD backlight
Stainless steel braided air hose
Rust-proof and durable copper connector
Operation Instructions:
1 ） Remove the valve core cap, connect the inflation chuck to the valve core, and ensure no air leakage.
2） Tire pressure detection: the measured in-tire pressure will be displayed once connected without the need to press the trigger.
3） Inflating operation: hold the trigger, and the inflator will inflate the tire.
4） Deflating operation: Press the trigger halfway, and the tire will be deflated via the inflator.
5） Energy-saving mode: the inflator will automatically shut down after 90 seconds not in use.
6） Press the operation button to turn on the backlight, and the backlight will automatically turn off after 10 seconds.
7） Press and hold the operation button for 3 seconds to set different units of measurement （BAR/ PSI/ KPAV/KGF）.
8） Frequent use of the backlight will reduce the battery life. Please change two AAA batteries if needed.
9） Working Pressure 0-12 Bar, with the reading accuracy of 0.01Bar and maximum inlet pressure of 15Bar.
Important:
1 ） To prevent personal injury, do not point the inflation chuck to any part of the body.
2） Oil-water filter cotton should be changed based on actual usage. It is recommended to change every six months.
3） SATA reserves the right to change the technical specifications of the product without prior notice.
Instruction for changing batteries:
1 ） Separate the soft rubber guard.
2） Remove the battery cover.
3） Change the batteries.
4） Restore the battery cover and guard.
Schematic diagram for replacing the oil and water filter cotton:
1 ） Unscrew the connector with a 14mm wrench.
2） Remove the filter cotton and replace it.
6