M.J. MALLIS GROUP siat F1 Manual De Instrucciones Y Recambios página 80

13-MAINTENANCE AND REPAIRS
13.10 REPLACEMENT OF THE EXTRUDED ROLLER GASKETS
(Carriage with mechanical brake))
- Remove the snap ring 1.
- Remove the pin 2.
- Remove the lever 3.
- Remove the bushing 4, the spring 5 and the support 6.
- Remove the brake disk 7 and the contrast 8.
- Unscrew and remove the screws 9.
- Remove the plate 10.
13.10 REPLACEMENT OF THE EXTRUDED ROLLER GASKETS
(Carriage with electromagnetic brake)
-
Disconnect the Klingen plug from its outlet.
- Unscrew the four screws 1.
- Lift the magnet-holder block 2.
- Extract all the components of the brake group 3 (disc, friction,
friction holder).
- Lift the extruded roller 4.
- Unloose the screws and lift the brake holder plate 5.
- Extract the elastic ring 6.
- Take off the washer 7.
36/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: [email protected]
SIAT S.p.A.
1
2
3
4
5
6
7
9
8
10
1
2
3
4
5
6
7