Technical Data; Rotary Hammer; Noise/Vibration Information; Hammer Safety Warnings - Milwaukee K 540 S Manual Original

TECHNICAL DATA

Rotary Hammer

Production code
Rated input
Output
No-load speed
Speed under load max.
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009, Drilling / Chiselling
Drilling capacity in concrete
Tunnel bit in concrete, bricks and limestone
Core cutter in concrete, bricks and limestone
Chuck neck diameter
Weight according EPTA-Procedure 01/2003

Noise/Vibration Information

Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling:
Vibration emission value a
h, Cheq
Uncertainty K =
WARNING
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accessori-
es, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
K 540 S
(220-240 V)
4181 21 03...
4181 01 03...
... 000001-999999
1100 W
550 W
450 min
430 min
3000 min
7,5 / 7,5 J
40 mm (SDS-max) 40 mm (SDS-max)
65 mm (SDS-max) 65 mm (SDS-max)
105 mm (SDS-max) 105 mm (SDS-max)
66 mm
6,3 kg
93,0 dB (A)
104,0 dB (A)
16,8 m/s
1,5 m/s
16,7 m/s
1,5 m/s

HAMMER SAFETY WARNINGS

Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a „live" wire may make exposed metal parts of the power
tool „live" and could give the operator an electric shock.
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Do not machine any materials that present a danger to health (e.g.
asbestos).
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Switch the device off immediately if the insertion tool stalls! Do
not switch the device on again while the insertion tool is stalled,
as doing so could trigger a sudden recoil with a high reactive force.
K 540 S
(110-120 V)
4181 41 03...
... 000001-999999
1100 W
550 W
-1 450 min -1
-1 430 min -1
-1 3000 min -1
7,5 / 7,5 J
66 mm
6,3 kg
91,5 dB (A)
102,5 dB (A)
17,5 m/s
2 2
2 1,5 m/s 2
2 15,4 m/s 2
2 1,5 m/s 2

English

GB
5