Print Preview - Esselte DYMO LETRA TagQX50 Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

As an example, pressing "E" repeatedly in the
French-language selection will scroll through
e – è – é – ê – ë. If you wait for more than
one second, the character will be selected
and the cursor will move to the next position
on the display. In addition, the
key will operate in the same way. This offers
an easy access to the most commonly used
currency symbols quickly.
Note: When the batteries are removed the
language setting will default to English.
TWO LINE LABEL
A second line of text can be added to your
label by pressing
If the display shows: abc
the label will print as:
Note: Big Font and vertical styles are not
available in 2-line printing, ERROR 6 will
flash if Big Font or vertical are active when
2-line printing is selected.
Printing Your Label

PRINT PREVIEW

Preview label before printing by pressing and
holding the
Key and
text will scroll across the display once. You
can also scroll manually through the label using
the Q or R arrows on the Navigation Key. If
you want to edit the label, use the navigation
Key to move the cursor through the text to
the place you want, then type or delete.
currency
to select.
↵ ↵
123
Abc
123
Key. The label
PRINTING A LABEL
Type in the text for your label and press
Key.
PRINTING A LABEL FROM THE MEMORY
1. Press and hold the
to view the labels stored in memory.
2. Use the Q or R arrows on the Navigation
Key to position cursor inside the text of
the label desired to print.
3. Press
. During printing the message
PRINT ... will be displayed.
CUTTING THE LABEL
After the label is printed use the cutter button
on the left-hand side of the unit and press
inwards, towards the machine (see Figure E).
DO NOT PUSH THE CUTTER BUTTON WHILE THE
LABEL IS BEING PRINTED, THIS WILL CAUSE
LABELS TO JAM AND DAMAGE THE UNIT.
Labels have easy peel split back tape for easy
removal of the tape backing.
PRINT CONTRAST
1. Press
Key and the
taneously.
2. The display will show the 5 contrast symbols.
3. Use the Q and R arrows on the Navigation
Key to select a lighter or darker setting.
4. Press
to select desired contrast setting.
9
Key and
Key
Key simul-
Tabla de contenido
loading

Tabla de contenido