Instr Uctions For Assembly; List Of Spare Par Ts - Kettler ERGORACE Instrucción De Montaje

Use for your regular cleaning, maintenance and care our
■
appliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from
the Sport specialized trade.
The exercise cycle has a electromagnetic brake system.
■
The equipment is independent of revolutions per minute.
■
Please ensure that liquids or perspiration never enter the machine
■
or the electronics.

Instr uctions for Assembly

RISK!
!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around. Always
dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if
children play with plastic bags!
Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
■
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
Please note that there is always a danger of injury when
■
working with tools or doing manual work. Therefore please be
careful when assembling this machine.
List of spare par ts page 32-34
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).
Example order: Art.no. 07988-880 / spare-part no. 10100030
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
Before use, always check all screws and plug-in connections as
■
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
■
Nobody may be in the moving range of a training person
■
during training.
The fastening material required for each assembly step is shown
■
in the diagram inset. Use the fastening material exactly as
instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelim-
■
inary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
6
GB KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
english
+44 1527 62423
Mail: [email protected]
+1 888 253 8853
+1 888 222 9333
5