Klarstein Olivia Manual Del Usuario página 17

4. Insert the mains plug into a 220 V socket.
Press the power button and the PAUSE/START
button (the operating light flashes red).
5. It reaches setting temperature (guild lights turn to green if reached the setting
temperature) in about one minute and starts to squeeze oil. Oil drops into
container directly.
Note: It would not start to work if not press PAUSE/START button even reaches the
setting temperature.
6. After working 45 minutes continuously or the hopper without material over
1 minute, it will access to protection function and guild light turns slow sparkling
red. Please press power button again to proceed.
Note: The appliance automatically stops working if the materials in the hopper are too
large. If this happens, restart the machine, press the PAUSE/START button and shred
the materials using the accessories provided with the machine (do not insert your hand
or the shredding accessory inside the hopper as this may damage the machine). If
material gets stuck in the hopper, the protection mode is activated immediately. Press the
REVERSE button for a few seconds and then press the PAUSE/START button to resume
operation.
Note: The oil content of soybeans is less than 10 % and their use is therefore not
recommended.
EN
17