Operation
WARNING: This heater must
be properly installed before it is
used.
Setting the Thermostat
1. Before connecting or discon-
necting plug, turn knob fully
counterclockwise. (Figure 4)
2. Heater is equipped with a
thermostat. To adjust tempera-
ture to your individual require-
ments, turn thermostat control
knob clockwise all the way
to turn heater on. The yellow
power light will illuminate (Fig-
ure 5). When room reaches
desired temperature, turn ther-
mostat knob counterclockwise
until you hear click. Leave in
this position to maintain room
temperature at this setting. For
additional heat, turn clockwise
until you hear click again and
heater will turn on. To shut
heater off turn thermostat knob
counterclockwise all the way.
The yellow power indicator light
will turn off.
!
NOTE:
Heater is equipped
with a fan delay to dissipate
residual heat from the element.
Heater fan will run for a brief
period after heater has reached
room temperature.
Figure 4
Thermostat control knob
(shown in off position)
Figure 5
Off
Low
High
Yellow light
Power ON
En Marche
Encedido
Over Temp
Surchauffe
Temperatura
Excesiva
Red light
9