Sound4you 661682 Manual Del Usuario página 16

Power ON/OFF
• Press the POWER ON/OFF button until a short beep
sounds and the Status LED light turns on.
• Press the POWER ON/OFF button again until a short beep
sounds and the Status LED light turns off.
Pairing mode (Bluetooth® pairing)
• Turn on the speaker as described above.
• Search and select "WBS20" in the Bluetooth® settings
of your mobile device.
• The Status LED will turn blue permanently when the
speakers are connected to your device.
NOTE:
• The loudspeaker should be no further than within a
radius of 10 m around your device.
• If the speaker is on, it will automatically connect to the
last connected device, if available. If not, the speaker
switches to pairing mode (The speaker can store a
maximum of 8 already connected devices)
• The speaker turns off automatically after 10 minutes if it
is not connected to a device during this time.
Disconnecting Bluetooth® Connection (uncoupling)
Press and hold the -button for 1-2 seconds until the LED
status light flashes rapidly blue.
TWS connection
The speaker includes the True Wireless Stereo (TWS)
function, which allows it to be connected to another
speaker via Bluetooth® for true stereo sound.
To activate, follow the steps below:
1.Place the two speakers side by side so that the distance
between them does not exceed 5-7 meters.