Boss 614UA Manual Del Usuario página 6

RESET THE SYSTEM
The RESET button is located on the front panel (as shown on the diagram). Press it vertically with a ballpen or metal object
will activate it. The reset button function is to be activated for the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate and reset is necessary.
Error symbol on the display and reset is necessary.
Note: If the unit cannot function normally after resetting, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the control panel.
LIQUID CRYSTAL DISPLAY PANEL (LCD)
The LCD panel display the frequency, time and activated functions.
NOTE:
It is a characteristic of LCD panel that if subjected to cold temperatures for an extended period of time, they will take longer
time to illuminate than under normal conditions, in addition, the visibility of the numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when temperatures increase to a normal range.
STATION PRESET BUTTONS (M1-M6)
You can store & recall six preset radio stations by pressing M1-M6 buttons
TO STORE A STATION: 1) select a band (if needed)
2) select a station by tuning up / down button
3) hold a preset button which you want store the station for at least 2 seconds. The
TO RECALL A STATION: 1) select a band (if needed)
MP3/SD/USB OPERATIONS
M1)PLAY/PAUSE AND FIRST TRACK BUTTON
Press this button briefly to pause MP3 play, press again to release pause.
M2)INTRO SCAN BUTTON
Press this button to select Intro Scan function, the first 10 seconds of each track will be played sequentially until this button
is pressed again, then normal play will resume at the current track.
M3)REPEAT BUTTON
Pressing this button will activate Repeat Function in the following order:
RPT ON RPT OFF
M4)RANDOM PLAY BUTTON
When random play mode is selected, the tracks will be played in random order, press this key one more time to cancel
random play mode.
preset number will appear on the display.
2) press a preset button briefly to recall the stored station.
E - 4