Nugen VACPAC+ VAP110 Guía De Uso página 9

Attach Accessories
1. Install vacuum tool adapter: align adapter base with intake port
and push firmly to "click" secure.
2. Install accessory tools as needed: fit accessory end into adapter
opening and push firmly to secure. (align marks on tool and
adapter for proper orientation)
To Remove Tool Adapter:
3. Press and hold adapter release button.
4. Pull tool adapter to remove from
vacuum unit.
For Added Reach:
Attach long reach extension
wand to tool adapter, then
connect accessory to
end of wand.
Note: All tools can be
used with or without
extension wand.
Emptying Dust Bin
For optimal performance, empty dust bin after each use.
Turn power off. Do not open dust bin while vacuum is running.
Remove handheld unit from mopstick before emptying dust bin.
1. Pull up on dust bin release lever.
2. Open dust bin lid, and tilt unit to empty.
3. Inspect mesh pre-filter and air filter for excessive dust or hair
build-up. Remove, clean, and replace as needed. (see next
section for details)
4. Close dust bin lid securely after emptying, ensuring lid fully
"snaps" closed.
Removing Filter Parts
Make sure dust bin is empty before accessing filter.
1. Unlock mesh pre-filter: twist counter-clockwise to
"click" open.
2. Remove mesh pre-filter.
3. Remove air filter by pulling firmly.
1-866-677-4420
1
2
3
+
4
2
1
3
1
2
9