Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.3 Warranty
Warranty Card
The documents are part of the tool find the warranty card.
Must completely fill out the warranty card to apply to this
copy of the sales receipt or invoice and deliver it to your
dealer to change the corresponding acknowledgment.
NOTE! If this missing card immediately let him ask
your dealer.
The warranty is limited only to manufacturing defects or
machining and ceases when the parts have been remo-
ved, tampered with or repaired outside the factory.
5.4 Elimination
We recommend that the power tools, accessories and
packaging should be a recovery process that respects the
environment.
Only for EU countries:
Do not dispose of power tools into household waste!
According to the European Directive 2002/96/
EC on Waste Electrical and Electronic Equip-
ment and its implementation into national law,
must accumulate power tools separately to be
submitted to an ecological recycling.
Subject to modification.
6. Marked regulatory
6.1 Technical Features
= Power input
= Idling speed:
= Drilling steel capacity
= Drilling wood capacity
= Protection class
= Weight:
These data are valid for nominal voltages [ U] of 230/240
V ~ 50/60 Hz - 110/120 V ~ 60 Hz values can vary lower
voltage , and the models for specific countries. Please
observe the article number on the nameplate of the de-
vice, as the trade names of the individual machines may
vary.
Information about noise and vibration
Noise determined according to EN 60745.
The typical level of sound pressure apparatus , determi-
ned with a filter A, amounts to: Sound pressure level 88
dB ( A); sound power level 99 dB (A). Tolerance K = 3
dB.
ENGLISH
12
Wear hearing protection !
Total vibration values ( vector sum ) determined accor-
ding to EN 60745 : Sanding drywall ah = 4 m/s2 , K = 1.5
m/s2.
The vibration emission level given in this information
sheet has been determined by the measurement proce-
dure specified in EN 60745 and may serve as a basis for
comparison with other power tools . It is also suitable for
provisionally assess the stress experienced by the vibra-
tions . The vibration emission level has been determined
for the main applications of the tool . Therefore, the vibra-
tion level may be different if the tool is used for different
applications, with different votes , or if the maintenance
of it was lacking. This may significantly increase the
exposure level over the total working period .
To accurately determine the stress experienced by the
vibration should also consider those times when the tool
is switched off or when it is running but not actually doing
. This may significantly decrease the exposure level over
the total working period . Attach additional security me-
asures to protect the wearer from the effects of vibration
such as : maintenance of power tools and accessories,
keep the hands warm, organization of work patterns.
6.2 EC Declaration of Conformity
The undersigned: STAYER IBERIAN, Inc.
Internet address:
Calle Sierra de Cazorla 7
Area Empresarial Andalucia - Sector 1
28320 PINTO (MADRID)
Tel: 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIED
The machine:
Type: ELECTRIC SCREWDRIVER
Model: TM10BA - TM10CA
Declare under our responsibility that the product des-
cribed under "Technical Data" is in accordance with the
following standards or standardization documents: EN
UNE EN 60745-1:2010 / A11: 2011, UNE EN 60745-2-
3:2011/A12:2015 according to 2006/95/EC, 2004/108/EC
and 2006/42/EC.
Ramiro de la fuente
Director Manager
March 3, 2015
12
Capítulos
Tabla de contenido
