Wiseup WIFI07 Guia Del Usuario página 6

How to check if remote view function works?
1. Back to the WLAN setting page on your iPhone or iPad, exit your iPhone or iPad from
the current WIFI network, enroll your iPhone or iPad in another WIFI hotspot, or you can
turn off the WLAN function, enable your mobile network data instead.
2.Make sure your iPhone or iPad has Internet access, launch the "Camwf" APP again. If
the camera shows "Connected" on the "Devices" page, it means the remote view setup
is successful and the camera has entered into WAN mode. You can go ahead to view live
or recorded video remotely from any location. The WAN Indicator light will be solid yellow.
Tips: If the camera shows "Connection failed" on the"Devices"page, please tap the
Refreshing icon and wait for 1 minute, the camera will show "Connected". If it still
doesn't work, that means you need to reset the camera (See VIII) and set up all over
again.
V. Motion Detection Recording Setup
>> Please make sure the camera is successfully added to the APP and it's online before
you start.
5.1. Launch the "Camwf" APP.
on the "Devices" page and then choose "Device Settings".
5.2. Tap the gear icon
5.3. On the "Device Settings" page, turn on "SD Record"and "Motion Detection" func-
tion.
5.4.Tap "Confirm" to complete the Motion Detection Video Recording setting.