Idiomas disponibles
Idiomas disponibles
4. Setup and operation
It's so simple – downloading the app:
• Download the Hama Smart Solution app from
the Apple App Store or on Google Play.
• Open the Hama Smart Solution app.
• If you're using it for the rst time, you'll have
to register rst and create a new account. If
you already have an account, log in using your
login details.
Connection/installation of the WiFi controller
Risk of electric shock
• Do not use damaged or unsuitable power
supply units or LED light strips.
• When changing LED light strips, always
ensure that the LED light strip in question is
current-free. Switch off the current and/or pull
the mains plug.
Warning
• Use this product only with power supply
units and LED light strips (GRB, BRG) that are
approved for the application. To that end,
check the technical speci cations of the power
supply unit, LED light strip and WiFi controller
for compatibility.
• Before carrying out the installation, check that
the power supply unit and LED light strip are
in perfect technical condition.
• Please note that lamps (even LEDs) generate
heat and may become hot. Always let the
LED light strip cool for a few minutes before
touching or changing it.
• Disconnect the product from the mains if it will
not be used for a long period of time.
• Connect the WiFi controller to an LED light
strip. Make sure that the polarity is correct: The
arrow on the plug indicates the contact that
must be connected to the 12-V contact of the
LED light strip. Please also refer to the operating
instructions for the LED light strip used.
• Then connect the controller to a properly
installed and easily accessible power socket via a
power supply unit. Please refer to the operating
instructions for the power supply unit used.
• The LED light strip begins to ash quickly. If
this does not happen, quickly disconnect and
reconnect the power supply unit three times.
• Open the app and tap 'My home' at the lower-left
edge of the screen.
• Then tap '+' at the upper-right edge of the
screen. Select the 'Switches' category followed by
item number '176568'.
• Tap 'OK' to con rm that the LED light strip is
ashing quickly.
• Then enter the name of your WiFi network and
the password. Tap 'OK' to con rm your entries.
• The WiFi controller is now connected to the app.
Once the connection has been established, the
LED light strip stops ashing.
• You can now set up, control and con gure the
WiFi controller using the app.
Note
If the colours blue and green are displayed in
the opposite sequence to in the app, disconnect
the controller from the power, and connect the
supplied adapter cable between the controller
and the LED light strip.
5. Care and Maintenance
Note
Disconnect the product from the mains before
cleaning it or if it is not going to be used for a
long period of time.
• Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive cleaning
agents.
• Make sure that water does not get into the
product.
4
