Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connect the external
equipment cables to the
TV after installation
For Customers, Sony Dealers
1
Tilt the TV upward.
1 Unplug the AC power cord.
2 Unfasten the two securing screws at the
bottom of the Mounting Rack (page 12).
3 Hold the bottom left and right of the TV and
gradually lift it upward.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
4 Confirm the two support braces of the Plate
Unit are locked into the bottom left and right
hooks on either side of the Mounting Rack.
5 Insert the screws removed in the step 2 into
the screw holes on the outer sides of the
bottom left and right hooks of the Mounting
Rack and tighten firmly to lock the support
braces.
2
3
14
(US)
Screw hole for fixing the
support braces
Support
braces
2
Connect external equipment
cables to the TV.
3
Restore the TV to the non-tilted
position.
1 Unfasten the screws tighten at the outer sides
of the bottom left and right hooks of the
Mounting Rack in step 5 of procedure 1.
2 Hold the bottom left and right of the TV and
pull it out toward you so that the support
braces are unlocked from the bottom hooks
on the Mounting Rack.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
3 Grasp the protruding part of the support
braces with your other hand and slide it
upward so that the support braces and the
TV are restored in the untilted position.
4 Tighten the securing screws.
5 Confirm that all the cables connected to the
TV are not twisted or pinched, and then plug
in the AC power cord.
WARNING
• Be sure two or more people do this work.
• Be careful not to pinch your hands or fingers.
3
Tabla de contenido
