Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Check the operation of
the woofer speaker
This Wall-Mount Bracket is equipped with a
woofer speaker. After installing the Mounting
Rack (with the TV) onto the Plate Unit, turn on
the power switch of the TV and check if the
woofer speaker is operating properly. If the TV is
not installed on the Mounting Rack properly, no
sound will be heard from the woofer speaker, or
an error message will appear on the TV screen
after a while.
Note
Depending on the environment where you install
the Wall-Mount Bracket, the woofer speaker may
produce a strong bass sound. If the bass sound is
too strong, adjust the sound quality to your
preference in woofer level setting from the TV's
menu option. See the instruction manual of the TV
for more details on adjusting the sound quality.
Remove the TV
For Sony Dealers
1
Unplug the AC power cord from
the wall outlet.
2
Remove all four securing screws
secured in step 4 of procedure
4 on page 12.
3
Be sure that two or more
persons hold the TV and slide it
upward to remove the TV.
WARNING
• Be sure that two or more persons hold the TV
when carrying it.
• Be careful not to allow the cords and cables to
get hung up when removing the TV.
• Be careful not to hurt your hands or fingers
when removing the TV.
Note
Always hold the TV by the non-transparent parts at
the top and bottom of the TV when carrying it.
13
(US)
Tabla de contenido
