Operating Elements; Before Start-Up; Assembling The Cleaner; Connections - MIRKA 412 Manual De Instrucciones

2.2

Operating elements

3 Before start-up

3.1

Assembling the cleaner

On delivery some of the accessories
are lying in the tank and must be re-
moved before the vacuum cleaner
is used for the first time.
Remove the upper section of the
vacuum cleaner:
The mains plug should not be in-
serted into a socket.
4 Operation
4.1

Connections

4.1.1 Connecting the suction
hose
Mirka 415 M: The suction hose di-
ameter must suit the position of the
switch in order to pick up dry, non-
flammable dust with maximum room
concentration values.

4.1.2 Electrical connection

See fold-out page at the front of
these operating instructions.
1 Handle
2 Accessory holder
3 Appliance switch with suction
power control
4 Retaining clamp
5 Dirt tank
1. Open the retaining clamps
and lift off the upper section
of the cleaner.
2. Take the accessories out of
the dirt tank and the packag-
ing.
The operating voltage shown on the
rating plate must correspond to the
voltage of the mains power supply.
6 Grip to empty tank
7 Inlet fitting
8 Appliance socket
9 Hose diameter setting
(Mirka 415 M)
10 Operating knob for filter
cleaning
11 Cable hook
3. To pick up dust with maxi-
mum room concentration
values:
Insert the filter bag into the
dirt tank according to the
instructions (instructions in-
cluded).
To pick up harmless dust:
Insert the disposal bag (in-
structions included) into the
tank.
IMPORTANT:
the filter bag connection firm-
ly on to the inlet fitting.
4. Fit the upper section of the
vacuum cleaner and close
the retaining clamps.
NOTE: Ensure that the
retaining clamps fit properly.
1. Connect the suction hose.
1. Ensure that the vacuum
cleaner is switched off.
2. Insert the power cord into a
properly installed and fused
socket with an earthing con-
tact.
Mirka 412 / 415 / 415 M
english
P r e s s
5