SATA AE5841 Manual Del Uso página 12

Overall dimension of the product:
Installation and operation:
1） Install the underframe assembly casters. Please ensure that 3" universal caster （small） is close to the groove, and 3.5"
universal caster （large） is on the other side.
2） Place two square pipes in the base groove, fix the square pipe and the base with four lock pins, and lock them with four cotter pins
at the inner side of the lock pin.
3） Install the post assembly on the underframe, and connect the post with the base assembly with the bracing plate on both sides.
4） Install the lifting arm in the post groove, ensure that the mount is installed in the middle of the post groove, and then tighten the bolt.
5） Fix the oil cylinder assembly on the post mount with bolts, nuts and plain washers.
6） Lift the lifting arm, and then connect the top of the hydraulic cylinder to the bottom mount of the lifting arm with bolts, nuts and
plain washers.
7） Lift the lifting arm to a proper position, lead the hook mounting pipe into the lifting arm square pipe, and then tighten it with bolts.
8） Tighten all bolts and nuts.
Folding operation:
1） Only remove the lock pin close to the hook and connected to the square pipe in the base groove.
2） If the lock pin is stuck, press down the handle to make the hanger slightly tilt so that the lock pin can be easily removed.
3） Overturn the square pipe and turn it to the side close to the handle. Handle the square pipe on the other side in the same way.
4） Insert the lock pin into the fixing hole in the middle to hold down the the square pipe from falling.
12
AE5841
中文
2150±10
2020±10
1883±10
EN DE RU KO
2283±10
PT JA ES