SATA AE5841 Manual Del Uso página 10

Operating instruction of 2t folding crane:
Product No.
Product name
Rated weight （kg）
Maximum ground
clearance of hook （mm）
Net weight （kg）
Gross weight （kg）
Carton dimension （cm）
Please check the product immediately after unpacking, so as to ensure that it is intact. If any component is found lost or damaged,
please contact the Customer Service Department of SATA Automotive Technology（Shanghai）Co., Ltd.
Please write down the product serial number:
Note: If no serial number is available, please record the date of purchase.
Please keep this Operation Instruction properly:
1） As this Operation Instruction covers safety warning, installation and operation, maintenance, common fault troubleshooting, etc. of
the product, please properly keep it.
2） Please record the serial number （or date of purchase） of this product on the first page of the Operation Instruction, and keep it
in a dry and safe place for reference.
3） Please use the product correctly on the basis that you have fully understood this information contained herein.
4） The equipment has been covered with product liability insurance.
Safety warning:
1） Be sure to carefully read and fully understand the instructions herein before use Incorrect operation may result in personal injury
and product damage.
2） Carefully check it before each use, and do not use it in case of oil leakage, and looseness or damage of parts and accessories.
3） Overloading is prohibited, otherwise the liability for accidents will not be covered by insurance.
4） The safety valve cannot be adjusted by the user, otherwise the liability for accidents will not be covered by insurance.
5） This product is designed for lifting rather than load supporting.
6） Do not jack up the piston rod out of the oil cylinder beyond the maximum piston stroke.
7） Before lifting the load, please ensure that the wheel is in the locked position.
8） Please keep children and other unauthorized personnel away from the working area.
9） Ensure that the bolt is installed on the foot pin assembly after adjusting the hook mounting pipe.
10
AE5841
0.5t position
1.0t position
1.5t position
2.0t position
中文
EN
AE5841
2t folding crane
2000
1883
2020
2150
2283
83.5
86
169×71×27
DE RU KO PT JA
±5
ES