Reaming I.d. Of Tube; Cleaning Inside Of Fittings; Accessories; Replacement Cutter Wheels/Cleaning Brush - RIDGID 122XL Manual De Operación

122XL Copper Cutting and Prep Machine

Reaming I.D. of Tube

NOTE! Maximum capacity of the reamer is 2" diameter
tubing.
1. Turn ON/OFF switch to ON position.
2. Remove burrs on inside of tube by placing tube over
reamer cone and gently applying pressure (Figure 8).
Long lengths of tubing should be supported by pipe
stands.
Keep fingers away from the reamer cone.
WARNING
Keep hands away from ends of tube that may have
burrs or sharp edges.
3. Turn ON/OFF switch to OFF position.
Figure 8 – Reaming I.D. of Tube

Cleaning Inside of Fittings

NOTE! Fitting brushes are an accessory and sold sep-
arately.
1. Check that brush is the correct size for the fitting
diameter. Install correct size fitting brush if necessary.
NOTE! Use 3" fitting brush on both 3" and 4" diameter
fittings.
Do not use a 4" fitting brush on this machine.
Will interfere with the tubing during cut-off.
2. Turn ON/OFF switch to ON position.
3. Push fitting over fitting brush (Figure 9). Hold fitting
securely to prevent rotation. For 4" fitting, rotate to
clean entire inside diameter.
Keep fingers away from brush.
CAUTION
4. Turn ON/OFF switch to OFF position.
8
Figure 9 – Cleaning Inside of Fittings

Accessories

Only the following RIDGID products have been designed
to function with the No. 122XL Copper Cutting And Prep
Machine. Other accessories designed for use with other
tools may become hazardous when used on this machine.
To prevent serious injury, use only the accessories listed
below.
Accessories, Replacement Cutter
Wheels, Cleaning Brushes For No.
122XL Cutting and Prep Machine
Cat. No. Description
36662 Model 301A Foot Switch – 120V
93717 1 /
2
93722 3 /
4
93727 1" Fitting Brush (Pkg. of 3)
93732 1
1
93737 1 1
93742 2" Fitting Brush (Pkg. of 3)
12638 2 1
12643 3" - 4" Fitting Brush (Pkg. of 3)
93747 Quick-Change Adapter f/Fitting Brush
93712 Fitting Brush Holder
33551 Cutter Wheel f/Copper and Stainless Steel
10343 Wheel Pin for 33551 Cutter Wheel
42295 Outside Diameter Cleaning Brush
42360 1206 Stand
Pipe Stands Recommended For Use
with No. 122XL Copper Prep Machine
• VJ98 Cat. No. 56657
• VJ99 Cat. No. 56662
• RJ98 Cat. No. 56667
• RJ99 Cat. No. 56672
Ridge Tool Company
WARNING
" Fitting Brush (Pkg. of 3)
" Fitting Brush (Pkg. of 3)
/ " Fitting Brush (Pkg. of 3)
4
/ " Fitting Brush (Pkg. of 3)
2
/ " Fitting Brush (Pkg. of 3)
2