stayer COM6 Manual De Instrucciones página 19

The compressor is designed for generating compressed
air for tools operated by compressed air.
1. List of contents
2. Special safety instructions...................................11
3. Machine-specific Safety Warnings.......................12
3.1. Placing or fixing the tool........................................12
3.2. Assembling..........................................................12
3.3. Electrical connection............................................12
3.4. Illustrated description...........................................12
3.5. Limiting environmental conditions........................12
4. Operating instructions..........................................12
4.1. Placement and testing..........................................12
4.2. Instructions for use...............................................13
5. Maintenance instructions.....................................13
5.1. Cleaning, maintaining, lubricating, sharpening.....13
5.2. Disposal...............................................................14
5.3. Repair service......................................................14
5.4. Guarantee............................................................14
6. Legal Regulations.................................................14
6.1. Technical features................................................14
6.2. EC Declaration of Conformity...............................14
2. Machine-specific Safety Warnings
Keep your compressor in a safe place. When the
compressor is not being used it should be kept in a dry,
locked room out of the reach of the children.
Do not overload your compressor. It is better and safer
to work within the quoted power range.
Look after your compressor. Keep your compressor
clean so that it works well and reliably. Follow the
maintenance instructions. Check the power plug and
cable regularly and have them replaced by a specialist if
you discover any damage. Check any extension cables
regularly and replace if damaged.
Check the compressor for damage. Before using the
compressor again, check the safety devices or any
slightly damaged parts to ensure that they are in good
working order. Check that the moving parts are working
correctly, that they do not jam, and that no parts are
damaged. Make sure that all parts are fitted correctly, to
ensure that the equipment remains safe to use.
Unless otherwise stated in the operating instructions,
damaged guards and parts have to be repaired or
replaced by a customer service workshop. Damaged
switches have to be replaced by a customer service
workshop.
Safety instructions for working with copressed
air and blasting guns
Compressors and lines reach high temperatures during
Ÿ
operation. Avoid contact! Risk of burns!
Gases or vapours drawn in by the compressor have to
Ÿ
be kept free of constituents that may cause fire or
explosions inside the compressor.
ENGLISH
11
When you disconnect the hose coupling, hold the
Ÿ
coupling element in your hand to prevent injury from the
whiplashing hose.
Wear goggles when working with the blowout gun.
Ÿ
Injuries may easily result from foreign bodies and
Page
blasted parts.
Never point the blow-out gun at other persons and never
Ÿ
use it to clean clothes that are still being worn.
Safety information for paint spraying
Never process paints or solvents with a flash point below
Ÿ
55°C.
Do not heat lacquers and solvents as they are highly
Ÿ
inflammable.
It is imperative to use filtering equipment (face masks)
Ÿ
when processing harmful liquids.Note also the
information concerning safety precautions published by
the manufacturers of these liquids.
Smoking is prohibited during the spraying operation and
Ÿ
in the work room. Paint vapours are highly flammable.
Make sure there are no open fires or open lights in the
Ÿ
work room. Sparking machines are not to be used.
Do not keep or consume food and drink in the work room.
Ÿ
Paint vapours are harmful.
The details and designations of the Ordinance on
Ÿ
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of
suitable clothing and masks.
The work room has to be bigger than 30 m3 and have
Ÿ
sufficient ventilation for spraying and drying. Never spray
into the wind. It is always imperative to observe the
regulations of your local police authorities when spraying
combustible or hazardous substances. Never process
media such as white petroleum spirit, butyl alcohol and
methylene chloride with the PVC pressure hose
(reduced life span).
Operating pressure vessels
An operator of a pressure vessel is required to keep the
Ÿ
pressure vessel in good working order, to operate it
properly, to supervise its use, to carry out essential
maintenance and repair work immediately, and to
introduce essential safety measures according to
requirements.
Ÿ
The supervisory authorities may order essential
safeguards from case to case.
Ÿ
A pressure vessel may not be operated if it has any
defects which constitute a danger to employees or third
parties.
The pressure vessel must be regularly inspected for
Ÿ
damage, e.g. rust. If you discover any damage, then
please contact the customer service workshop. Keep
these safety instructions in a safe place.
11