Tabla de contenido
Idiomas disponibles
Idiomas disponibles
中文
EN
DE
RU
KO
PT
JA
ES
90521
4） With the slide sleeve being pushed to the bottom, screw in the nut mandrel as required and tighten it.
5） After tightening the hex nut, release the slide sleeve and connect the nut nose piece.
Note:If the nut rivet can not be removed due to improper use during riveting, do not pull out the riveter with force. Proper operation:
Insert an L-type wrench （with a diameter less than 5 mm） into the hole, and rotate the riveter together with the wrench. Be careful
not to damage the internal parts of the riveter during rotation.
18
Tabla de contenido
