Troubleshooting; Parts List - vigo VG02026 Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
1 - Leaks from handle
2 - Insufficient flow rate
3 - Leak at connection points
4 - Loose faucet body
5 - Sprayer button stops working

PARTS LIST -

For any parts needed but not shown, please contact VIGO Technical Support
PART
Black Rubber PVC Sprayer Hose
Sprayer
Handle
Aerator Ring
Sedal Cartridge
Metal braided Hose
Sprayer Washer
Sprayer Hose O-Ring
Diverter Cartridge
POTENTIAL CAUSE
1.A - Cartridge unseated
1.B - Cartridge defective
2.A - Dirty aerator
2.B - Clog in supply hose / line
3.A - Sprayer hose not tight
3.B - Flexible hose leaking at body or connection point
4. - Metal nut became loose
5.A - Debris in aerator
5.B - Wear and tear on button
SUPPLY DATE INDICATOR (INTERNAL USE ONLY)
PART #
74042 P
78095 P
78094 P
78096
P
74026 P
74020 P
74008 P
74043 P
78066 P
TOLL FREE: (866) 591 - 7792
E-Mail: [email protected]
www.vigoindustries.com
CORRECTIVE ACTION
1.A - Remove cartridge from housing, wash thoroughly with hot
water and reseat in housing.
1.B - Contact Vigo Technical Support for replacement.
2.A - Remove and soak / clean with a non abrasive agent (i.e.
vinegar).
2.B - Remove sprayer or supply line and flush lines
3.A - Remove sprayer and check integrity of the black washer.
Make sure the washer is seated properly and retighten.
3.B - Tighten hoses. If this does not resolve the issue, remove
the flexible hose and rethread, checking to make sure the
connection is secure. Make sure to use pipe tape.
4. - From under the counter, use an adjustable wrench and
tighten the metal nut to the hollow pipe. Make sure the faucet is
perpendicular to the counter.
5.A - Remove and clean aerator.
5.B - Contact Vigo Technical Support for replacement.
4