Aigostar 8433325503109 Manual Del Usuario página 4

GB
General Description
ASSEMBLY WARNING: Always make sure the
appliance is turned off and unplugged before
assembly and disassembly.
1.Wash all detachable parts
2.Place the base on a clean, flat surface.
3.Place the juice collector into the appliance.
4.Place the filter in the juice collector, making sure
the filter is fitted securely onto the clutch.
03
1.Pusher
2.Cover with feed tube
3.Filter
4.Juice collector
5.Pulp container
6.Spout
7.Locking handle
8.Base
9.Control knob
◆ OFF: 0 position
◆ 2 speeds: 1 and 2 positions
10.Foam separator
11.Juice jug cover Juice jug
5.Slide the pulp container into position on the left
side of the base by tilting opening slightly under
the juice collector.
7.Slide the pusher into the feeding tube.
◆ Make sure that the groove on the pusher is
aligned with the small protrusion inside the feed
tube.
8.Place the juice jug under the spout.
The juice jug is fitted with a foam separator
◆
which is designed to remove foam from the juice
and give you a clear juice.
◆ If you want juice with a foam layer, remove the
foam separator.
NOTE: Make sure that locking handle and
cover are locked in place properly; otherwise
the appliance will not operate.
6.Place the cover on the juice collector
and lock the cover into position by
snapping the locking handle onto the
recesses of the cover.
GB
04