Maintenance Instructions; Troubleshooting Guide; Warranty Information - BriskHeat Plata Serie Manual De Instrucciones

MAINTENANCE INSTRUCTIONS

Anyone who reads and understands these instructions is
qualified to maintain this product.
Maintenance:

All maintenance should be performed after the component and insulation system has
cooled to a safe-touch temperature and, where applicable, the electricity has been
disconnected from any heating devices.

Dirt, oil, grease or other foreign matter can be removed with a damp rag and mild
household cleaners.

This product should be inspected prior to being installed and at least every 6 months
during use.

Do not attempt to repair a damaged insulator.
Inspection:

Inspection should be performed after the component and insulation system has cooled
to a safe touch temperature and where applicable, the electricity has been
disconnected from any heating devices.

The insulator should be free of any cuts, cracks, or punctures.

The heater should be free of any build-up of dirt, oil, grease, or other foreign matter.

Drawstrings, where applicable, shall be tightened, secured, and safely stowed.

For a replacement insulator, refer to the part number printed on the insulator. If the
part number is not visible, contact your local distributor/representative or contact
BriskHeat for assistance.
Storage:

This product should be stored indoors.
Disposal:

This product does not contain any hazardous substances and may be discarded with
domestic waste.
®
© BriskHeat Corporation. All rights reserved.
Silver-Series Cloth Insulators
7

TROUBLESHOOTING GUIDE

Please read this guide prior to contacting BriskHeat
most commonly asked questions. If you need additional assistance, please contact your
local distributor/representative or contact BriskHeat at 1-800-848-7673 (Toll free US /
Canada) or 614-294-3376 (Worldwide), or by email at [email protected].
PROBLEM SOLUTION(S)
Does not fit Confirm the insulator provided is the correct size and shape part
number designed to fit around your object.
If the insulator does not fit, please contact your local
distributor/representative or BriskHeat for assistance.

WARRANTY INFORMATION

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18)
months from date of shipment or twelve (12) months from date of installation, whichever
comes first. BriskHeat's obligation and the exclusive remedy under this warranty shall be
limited to the repair or replacement, at BriskHeat's option, of any parts of the product which
may prove defective under prescribed use and service following BriskHeat's examination, is
determined by BriskHeat to be defective. The complete details of the warranty can be found
online at www.briskheat.com or by contacting us at 1-800-848-7673 (toll free, U.S. /
Canada) or 1-614-294-3376 (Worldwide).
Corporate Headquarters:
4800 Hilton Corporate Dr.
Columbus, OH 43232, U.S.A.
Toll Free: 800-848-7673
Phone: 614-294-3376
Fax: 614-294-3807
Email: [email protected]
®
© BriskHeat Corporation. All rights reserved.
Silver-Series Cloth Insulators
®
. This guide is designed to answer the
Europe:
P.O. Box 420124
44275 Dortmund, Germany
8