Technical Data - Vetus 330VTEB Manual De Manejo Y Instrucciones De Instalación

Bleeding
Most engines nowadays are self-bleeding. If
this is not the case, you will have to bleed the
system yourself after having drained off the
water or having replaced the filter element.

Technical data

Type
Version
Engine output
Maximum capacity
(consumption + return)
Filter grade
Connections
Weight
Certified
Replacement filter, filter grade 10 micron
Replacement filter, filter grade 30 micron
When the maximum capacity is established,
bear in mind that for double filters, you must
make your calculations with only one filter in
use.
For double filters, engine power and maximum
capacity are given on the basis of one filter in
8
040305.02
Fill the new filter element with clean fuel, fit
the element and let the motor run at half throt-
tle for 30 seconds.
Alternatively: Use the manual lever on the fuel
feed pump to allow manual bleeding.
330VTEB 330VTEPB
Single With pump
up to 140 HP
up to 103 kW
190 litres/hour
42 Imp. Gallons/hour
50 US Gallons/hour
M16 X 1.5 M16 X 1.5
1.3 kg 1.3 kg
2.9 lbs 2.9 lbs
VT33EB VT33EB
VT33ER VT33ER
service and the other filter as a spare.
Maximum capacity is determined assuming
a pressure of 0.1 kg/cm
filter element and good quality diesel fuel.
75330VTEB
Dual
R ½
4.7 kg
10.4 lbs
2 x VT33EB
2 x VT33ER
2 (3 in Hg) with a new
Fuel Filters/Water Separators