Main Menu - Denwa iP Access Manual Del Usuario

• Programming mode is active for about 10 minutes, if this period is exceeded without
entering commands , the product will exit automatically the programming mode and
you have to reenter the password to program again.
Once in Programming mode, the product shows the following screen
The main menú shows the parameters that most often use to be modified. At the bottom
you can see two buttons that only are in the main menu:
• REBOOT:
Restart the product (address of iP Access must be reloaded manually in the
browser). Follow this procedure to allow the product reload IP address, if it was
modified. Except for IP address, the rest of the parameters, are immediately
changed on the product when it is programmed
• RESTORE:
Reload all factory default settings (except the IP address)
Página 23 de 33
Manual de Portero IP v 8.0
DENWA IP Access
Versión de software (desde) 3.17

Main Menu