Cleaning And Care - auna Boomboy Manual De Instrucciones

1. Slide the function switch [RADIO-TAPE (OFF)-CD] to TAPE (OFF) position.
2. Press  , to open the cassette door and insert the cassette (tape at the top) in the compartment.
Then close the cassette door.
3. Press , to start playing and adjust the volume level.
4. Press to go forward or

5. Press to suspend momentarily the tape and release the button to resume play .

6. To stop playing, press   and press again to take back your cassette.
• Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
• Using solvents, abrasive or alcohol-based products risks damaging the appliance.
• If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an
authorized engineer.
Transport
• Before transporting the unit, remove the disc from the disc compartment.
Quit slacking
A little bit of slack in your tapes can cause scratches on the tape, or worse yet, the tape could break.
If you notice some slack in the tape, use a pencil to tighten it up before you insert it into the cassette
holder.
TO CLEAN THE HEADS AND TAPE PATHS: After every 10 hours of use, clean the recording heads and
playback head, the pinch roller and capstan. Use a cotton swab it slightly moistened with cleaning fluid
or denatured alcohol.
WARNING: Danger of electric shock
Disconnect the unit from the mains supply before cleaning
16
Listening to the Cassette
to rewind your tape.


Cleaning and Care