Power Source; Basic Function - Trevi CMP 570 BT Manual Del Usuario

Digital boombox con bluetooth
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

POWER SOURCE

BATTERY POWER OPERATION
1. Open the BATTERY COMPARTMENT DOOR by pushing the catches downwards.
2. Install 6 x UM2 batteries carefully as indicated in battery compartment.
3. Close the BATTERY COMPARTMENT DOOR.
• Remove batteries if they are flat or not being used for a long period of time.
• Batteries contain chemical substances, so they should be disposed of properly.

BASIC FUNCTION

SWITCHING ON THE UNIT
1. Plug the AC MAIN POWER PLUG into the standard household AC receptacle.
2. Press the STANDBY button to switch the unit on or off.
NOTE: In CD/USB/AUX/BT mode when the unit is not providing the main function for 15
minutes, the unit will automatically switch into standby mode. To turn on the unit
again, press "STANDBY" button or replug the unit.
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL back and forth to increase and decrease volume.
AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Press the FUNCTION button to AUX position.
2. Connect the audio cable into the AUX-IN jack and the other end connect to the AUDIO
OUT jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
USING THE RADIO
TUNING IN RADIO STATIONS
1. Press the FUNCTION button to FM mode. Press the BAND button to select the desired
wave band: AM/ FM ST..
2. Tune to required station by rotating the TUNING CONTROL.
3. Rotate the VOLUME CONTROL to comfortable volume level.
4. Extend the TELESCOPIC ANTENNA to its full length if you are listening to FM bro-
adcasting. Gently rock the unit back and forth to get the best reception when you
are listening to AM program, or place the unit in an open place.
Note: The STEREO indicator will be on if you are receiving FM stereo program.
9
Tabla de contenido
loading

Tabla de contenido