Discs For Playback; Loading A Disc; Playing A Disc - Trevi CMP 570 BT Manual Del Usuario

5. Turn off the radio by press the STANDBY button.
USING THE CD/MP3

DISCS FOR PLAYBACK

This system can playback all digital audio CD, MP3, WMA finalized digital audio CD-
Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and
CD-DA format digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the FUNCTION button to CD mode.
2. Press the CD DOOR OPEN/CLOSE to Open the CD door.
3. Place an audio CD/MP3 disc into the tray with the label side facing up.
4. Close the CD door.
The total number of tracks will appear on the display after several seconds.
5. To remove the CD/MP3 disc, press the CD DOOR OPEN/CLOSE to open CD com-
partment lid, grasp the CD/MP3 disc by its edges, and carefully take it out.
Note:
• To ensure good system performance; wait until the disc tray completely reads the
disc before proceeding.
• If no disc is loaded into the compartment, or the disc is placed upside down, the
display will show No.

PLAYING A DISC

1. The playback starts from track 1 automatically when reading the disc.
To pause playback, press /PAIR button. The current track will flash on the display.
To resume playback, press /PAIR button again.
2. To stop playback, press STOP button and the display will show the total number
of tracks.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
• Press the CD SKIP/SEARCH FORWARD /BACKWARD button repeatedly in stop
mode or during playing until the desired track appears on the display.
• Press the /PAIR button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the CD SKIP/SEARCH FORWARD /BACKWARD button to scan the current
10
playing track at high speed until desired point passage, and then release the button.