Switching On And Off - AVM FRITZ!DECT 200 Instalación Y Operación

Now insert FRITZ!DECT 200 in the socket
where you would like to use the device.
FRITZ!DECT automatically re-registers
with the FRITZ!Box. When the connection
has been established, the LED "DECT"
lights up.
If "DECT" keeps fl ashing, test a dif-
ferent outlet closer to the FRITZ!Box.
The outlet must be located within the
range of the DECT radio network of
the FRITZ!Box.
Switching On and Off
The socket on your FRITZ!DECT can be
switched on and off in various ways.
The socket is switched off upon
delivery.
You can confi gure automatic switching
and control the socket with a weekly
calendar or a Google calendar.
You can also switch the socket on and off
by hand at any time, even when automat-
ic switching is enabled:
 using the "On/Off " button (page5)
 by mouse click on the computer
(page 9)
 using a FRITZ!Fon as a remote control
(page 12)
8
Confi guring and Operating at
the Computer
Once you have registered FRITZ!DECT 200
with the FRITZ!Box, you can confi gure and
operate FRITZ!DECT 200 in the FRITZ!Box
user interface.
Opening the FRITZ!Box User Interface
The user interface can be opened on any
computer connected with the FRITZ!Box.
1. Open a web browser.
2. Enter in the address fi eld of the
fritz.box
browser.
3. Open the "Home Network / Smart Home"
menu.
The "Smart Home" page appears, pre-
senting a list of the registered FRITZ!DECT
devices.
Switching the Socket Off and On
On the "Smart Home" page you can switch
the socket on your FRITZ!DECT 200 on and
off with the click of the mouse. Do this by
clicking on one of the following icons:
Icon The socket is
off
on
9