LEDs
LED
Condition
Meaning
off
> socket is switched off
On/O
on
> socket is switched on
fl ashing
> Transmitting fi rmware update to FRITZ!DECT 200. (Depend-
ing on the progress of the fi rmware update, the LED is off or
fl ashing.)
fl ashes
> FRITZ!DECT 200 switched off the integrated socket because
briefl y at regu-
the permitted amperage was exceeded. For more informa-
lar intervals
tion, see also page 13.
DECT
on
> FRITZ!DECT 200 is registered with the FRITZ!Box.
fl ashing
> Registering with FRITZ!Box.
fl ashes
> FRITZ!DECT 200 is not connected to the FRITZ!Box.
briefl y at regu-
FRITZ!DECT is either not registered, or it is outside the
lar intervals
FRITZ!Box range.
6
Registering with FRITZ!Box
1. Insert the FRITZ!DECT 200 in an outlet
near your FRITZ!Box.
The "DECT" LED fl ashes regularly.
2. Within 2 minutes, press the "DECT"
button on your FRITZ!Box.
Hold the button down until the "Info"
or "DECT" LED on the FRITZ!Box begins
fl ashing.
FRITZ!DECT 200 is registered with the base
station. The wireless connection has been
established when the "DECT" LED lights up.
WLAN
W
W LAN
N
DECT
DECT
D
D ECT
DE
D
DE
D ECT
E CT
E CT
WLAN
W
W L
W W
W
L AN
10 seconds
If "DECT" continues to fl ash, regis-
tration was not successful. Remove
FRITZ!DECT 200 from the power
outlet and repeat the registration
process.
7