Setup
Carefully unpack the system and identify the main components.
Simeon VoiceOver Personal Voice Amplifier
The Simeon VoiceOver is a simple body-worn amplification solution that can
be used in just about any environment!
It is recommended that you charge the amplifier fully before its initial use.
Open the battery compartment [5] and insert six NiMH size AAA batteries (sup-
plied), taking care to observe the correct battery polarity.
(alkaline) batteries in combination with the charging system.
around your waist and tighten the adjustable strap so it sits snuggly and comfort-
ably at the hip.
Simeon 623 Directional Boom Microphone
The standard Simeon 623 directional boom (headset) microphone and its al-
ternatives offer a great hands-free way to use the VoiceOver in many different
speaking environments.
Plug the boom microphone into the 3.5mm input jack marked MIC IN on the
side of the VoiceOver [5]. PLEASE NOTE: If the microphone is inserted into the
AUX IN jack speech will not be amplified. Place the microphone frame [12] over
your ears and adjust the boom arm [10] so the microphone capsule sits approxi-
mately 1 cm from the corner of your mouth. It is not necessary to place the
microphone in front of your lips and doing so may diminish sound quality. The
boom microphone frame must be adjusted to rest comfortably over both ears,
with no other contact or pressure points against the head or face. Ensure that
the VoiceOver is turned ON and the volume control [3] set to an audible level.
Operation
Simeon VoiceOver Personal Voice Amplifier
To turn the amplifier on, press the power ON / OFF button [1] until the green
LED indicator illuminates [2]. The device requires either a microphone or other
sound input source, connected via the MIC IN [7] and AUX IN [9] jacks respec-
tively. The large scroll wheel controls the volume of the amplifier [3].
To turn the amplifier off, simply press the power button [1] until the green
indicator LED turns off [2].
Never use disposable
Clip the Voiceover
3