Adjustments - Klarstein Vinovilla 29 Built-In Duo Manual Del Usuario

ADJUSTMENTS

For easy access to the storage content, you must pull the shelves approximately 1/3 of
its depth out of the rail compartment. These wine cabinets, however, are designed with a
notch on each side of the shelf tracks to prevent bottles from falling. When removing any
of these shelves out of the rail compartment, tilt the shelf as per the diagram and simply
pull out, or push in the shelf until it sits on the support brackets securely.
Common wooden shelf:
1. According to right instruction drawing to press one side of shelf limit pin (1), extract
and remove the shelf from the other side of support bracket (2), then take off the
shelf following the arrow mark (3).
2. Shelf installation will be opposite with shelf taking.
Attaching the door handle
• Remove the handle from the cabinet and remove
the 2 screws from the accessory bag.
• Open the door seal on the inside of the door
and insert the screws into the two handle holes
on the door. Place the handle on the screws from
the outside and tighten the screws with a Phillips
screwdriver.
EN
29