Installation Instructions - Candy CCVB 30/1 Instrucciones De Instalación

 Before Using Your Wine cooler
Remove the exterior and interior packing.
•
• Before connecting the Wine cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• When disposing your appliance, please choose an authorized disposal site.
 Installation of Your Wine Cooler
• This appliance is designed to be for free standing installation or built-in (fully recessed)
(Refer to sticker location the back of this appliance).
This appliance is intended to be used exclusively for the storage of wine or beverages.
•
• Place your Wine cooler on a floor that is strong enough to support it when it is fully loaded.
To level your Wine cooler, adjust the front leveling leg at the bottom of the Wine cooler.
This appliance is using flammability refrigerant. So never damage the cooling pipework
•
during the transportation. Locate the Wine cooler away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient temperatures may also
cause the unit not to perform properly.
• Avoid locating the unit in moist areas.
Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do not under
•
any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized Products service center.
 Attention
Store wine in sealed bottles;
•
• Do not overload the cabinet;
Do not open the door unless necessary;
•
Do not cover shelves with aluminum foil or any other shelf material which may prevent air
•
circulation;
Should the Wine cooler be stored without use for long periods it is suggested, after a careful
•
cleaning, to leave the door ajar to allow air to circulate inside the cabinet in order to avoid
possible formations of condensation, mold or odors.
 Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures specified by its temperature class
marked on the rating plate.
- extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C';
- temperate (N): 'this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 32 °C';
- subtropical (ST): 'this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 38 °C';

INSTALLATION INSTRUCTIONS

6