Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION
The performance of the Cobalt coaxial speakers is directly proportional to the
quality of installation. Care taken during the installation process will be
rewarded with years of satisfying performance. If you are unsure about your
installation capabilities, please refer to your local Authorized ORION Dealer
for technical assistance. ORION dealers are trained professionals dedicated
to obtaining the maximum performance out of your ORION system. If
you decide to install this speaker system yourself, please read the entire
installation section before starting your installation.
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation.
Having the proper tools will make the installation much easier. Some of these
tools are required.
• marking pen
• wire crimpers
• volt-ohm meter (opt.)
• 1 / 8 " drill bit
• assorted tin snips
• Phillips screwdriver
• 4 3 / 4 " (120mm) hole saw (5"Coaxial installation)
• 5 1 / 2 " (140mm) hole saw (6" Coaxial installation)
WHAT'S IN THE BOX
Included in this box are all the necessary mounting hardware and cables
for your basic installation. Listed below is a detailed list of the components
included in this system package.
Quantity
1
1
2
2
1
2
•
needle nose pliers
• electric drill
•
wire strippers
•
wire cutters
• hole saw arbor
Description
Installation and Operation Manual
Mounting template
Cobalt Coaxial Speakers
Grills (except for 4", 6", 4x6",5x7",6x8")
Mounting Screws
@2012 MD Audio Engineering-all rights reserved
Tabla de contenido
