Important Safety Information - Heatworks 1 Manual

PLEASE READ THESE INSTRUCTIONS
THOROUGHLY AND COMPLETELY
PRIOR TO INSTALLATION AND USE.
FAILURE TO DO SO COULD RESULT IN
PROPERTY DAMAGE, SERIOUS INJURY,
OR DEATH. IMPROPER INSTALLATION
OR USE WILL VOID YOUR WARRANTY.
Check our website,
www.myheatworks.com for the latest
version of the Installation & User Manual.
www.myheatworks.com
1
TURN OFF CIRCUIT BREAKER AND WATER SUPPLY
BEFORE INSTALLING THE MODEL 1.
SERIOUS BODILY INJURY OR DEATH MAY OCCUR IF
YOU IGNORE THIS WARNING.
Shut off all power to the unit directly at the breaker
box prior to installing or inspecting your Heatworks
MODEL 1.
The Heatworks MODEL 1 must be installed by a licensed
electrician and licensed plumber in accordance with all
national, state, provincial, and local electrical and
plumbing codes.
This Heatworks MODEL 1 was tested before leaving the
factory. As a result, there may be a small amount of
residual water in the MODEL 1.
CAUTION: Breaker must remain off until installation is complete. CAUTION: Breaker must remain off until installation is complete.

IMPORTANT SAFETY INFORMATION

1