Kalorik CKS 36812 Manual Del Usuario página 5

Fax +32 2 359 95 50
OPERATING INSTRUCTIONS
We recommend that you recharge your electric wine bottle opener
for at least eight hours before using it for the first time. Please follow
the instructions for recharging below:
Recharging Your Electric Wine Bottle Opener
Plug one end of the adapter cord into the base of the
•
recharging unit and the other end into a power outlet.
Line up the white arrow at the base of the wine bottle opener
•
with the white line on the charging base. Place the electric
wine bottle opener into charging base ensuring that it is firmly
in position and that it is fully engaged with the charging
connector. Please note: the wine bottle opener will only fit
into the charging base one way. The blue light will turn on
when it is seated properly.
It will take approximately 6-8 hours to recharge your electric
•
wine opener fully.
When fully charged your wine bottle opener can be used to
•
open approximately 25 to 30 wine bottles in one single
charge.
To prolong the life of the wine bottle opener, disconnect the
•
adapter after 8 hours.
Foil Cutter
The foil cutter can be stored on the charging base.
•
Before removing the cork you must remove any foil from the
•
bottle.
Attach the foil cutter to the top of the wine bottle.
•
Keep one hand on the lower part of the bottle and turn the
•
foil cutter in twisting motion to remove foil.
Remove foil to expose cork surface.
•
To Operate Your Electric Wine Bottle Opener
1. Place the electric wine bottle opener on top of the wine
bottle making sure that it remains as upright as possible at all
times. If you hold the electric wine bottle opener at an angle
to the bottle it will not remove the cork properly.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity. Print only what is inside the frame.
5
Assembly page 5/16
USK CKS 36812 - 110622